OBJECTARX编程--圆弧

admin1

创建圆弧
CCALCULATION.CPP
AcGePoint3d CCalculation::Pt2dTo3d(AcGePoint2d pt)
{
    AcGePoint3d ptTemp(pt.x,pt.y,0);
    return ptTemp;
}
#include <math.h>
double CCalculation::PI()
{
    return* atan(1.0);
}
CREATEENT.CPP
//创建圆弧
AcDbObjectId CCreateEnt::CreateArc(AcGePoint3d ptCenter, AcGeVector3d vec, double radius, double starAngle, double endAngle)
{
    AcDbArc *pArc = new AcDbArc(ptCenter, vec, radius, startAngle, endAngle);
    //(圆心，平面，半径，起点角度，终点角度)
    /*StartAngle和EndAngle并不是起终点的角度，StartAngle可以认为是个参考角，
    默认是0，如果将圆弧绕圆心旋转10度，那这个StartAngle就是10度，EndAngle始终不变，是圆弧的圆心角。*/
    AcDbObjectId arcId;
    arcId = CCreate::PostToModelSpace(pArc);
    return arcId;
}

//创建位于XOY平面上的圆弧的函数
AcDbObjectId CCreateEnt::CreateArc(AcGePoint2d ptCenter, double radius, double startAngle, double endAngle)
{
    AcGeVector3d vec(0,0,1);
    return CCreateEnt::CreateArc(CCalculation::Pt2dTo3d(ptCenter),vec,radius,startAngle,endAngle);
}

//三点法创建圆弧
AcDbObjectId CCreateEnt::CreateArc(AcGePoint2d ptStart, AcGePoint2d ptOnArc, AcGePoint2d ptEnd)
{
    //使用几何类获得圆心，半径
    AcGeCircArc2d geArc(ptStart, ptOnArc, ptEnd);
    AcGePoint2d ptCenter = geArc.center();
    double radius = geArc.radius();

    //计算起始和终止角度
    AcGeVector2d vecStart(ptStart.x - ptCenter.x, ptStart.y - ptCenter.y);
    AcGeVector2d vecEnd(ptEnd.x - ptCenter.x, ptEnd.y - ptCenter.y);
    double startAngle = vecStart.angle();
    double endAngle = vecEnd.angle();       
    /*AcGeVector2d 类用来表示一个二维空间中的矢量，
    其成员函数 angle 返回该矢量和 X 轴正半轴的角度（用弧度来表示）。*/
    return CCreateEnt::CreateArc(ptCenter, radius, startAngle, endAngle);
}

//"起点，圆心，终点"创建圆弧
//这个函数的名称不再是 CreateArc，而是 CreateArcSCE，这是因为该函数的参数列表、返回值都与三点法的函数相同，无法实现函数的重载，就只能重新定义一个新的函数名称。
AcDbObjectId CCreateEnt::CreateArcSCE(AcGePoint2d ptStart, AcGePoint2d ptCenter, AcGePoint2d ptEnd)
{
    //计算半径
    double radius = ptCenter.distanceTo(ptStart);
    //计算起，终点角度
    AcGeVector2d vecStart(ptStart.x - ptCenter.x, ptStart.y - ptCenter.y);
    AcGeVector2d vecEnd(ptEnd.x - ptCenter.x, ptEnd.y - ptCenter.y);
    double startAngle = vecStart.angle();
    double endAngle = vecEnd.angle();
    //创建圆弧
    return CCreateEnt::CreateArc(ptCenter, radius, startAngle, endAngle);
}
//"起点，圆心，圆弧角度"创建圆弧
AcDbObjectId CCreateEnt::CreateArc(AcGePoint2d ptStart, AcGePoint2d ptCenter, double angle)
{
    //计算半径
    double radius = ptCenter.distanceTo(ptStart);
    //计算起点，终点角度
    AcGeVector2d vecStart(ptStart.x - ptCenter.x, ptStart.y - ptCenter.y);
    double startAngle = vecStart.angle();
    double endAngle = startAngle + angle;

    //创建圆弧
    return CCreateEnt::CreateArc(ptCenter, radius, startAngle, endAngle);
}
ACRXENTRYPOINT.CPP
#include "Calculation.h"
static void MLMyGroupAddArc()
{
    // 创建位于XOY平面上的圆弧-
    AcGePoint2d ptCenter(50, 50);
    CCreateEnt::CreateArc(ptCenter, 100 * sqrt((double)2) / 2, 5 * CCalculation::PI() / 4, 7 * CCalculation::PI() / 4);
  
    // 三点法创建圆弧-右
    AcGePoint2d ptStart(100, 0);
    AcGePoint2d ptOnArc(120, 50);
    AcGePoint2d ptEnd(100, 100);
    CCreateEnt::CreateArc(ptStart, ptOnArc, ptEnd);
  
    // “起点、圆心、终点”创建圆弧
    ptStart.set(100, 100);
    ptCenter.set(50, 50);
    ptEnd.set(0, 100);
    CCreateEnt::CreateArcSCE(ptStart, ptCenter, ptEnd);
  
    // “起点、圆心、圆弧角度”创建圆弧
    ptStart.set(0, 100);
    ptCenter.set(50, 50);
    CCreateEnt::CreateArc(ptStart, ptCenter, CCalculation::PI() / 2);
}