admin 发表于 2024-5-2 22:41:36

arx 自定义实体简单实例

class DLLIMPEXP MyLineEx : public AcDbEntity {


public:
ACRX采用DECLARE采用MEMBERS(MyLineEx) ;


protected:
static Adesk::UInt32 kCurrentVersionNumber ;


private:
AcGePoint3d m采用ptStart;
AcGePoint3d m采用ptEnd;


public:
MyLineEx () ;
MyLineEx (const AcGePoint3d& s,const AcGePoint3d& e);


virtual ~MyLineEx () ;
//----- AcDbObject protocols
//- Dwg Filing protocol


保存,复制
virtual Acad::ErrorStatus dwgOutFields (AcDbDwgFiler *pFiler) const ;
virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler *pFiler) ;


//----- AcDbEntity protocols
//- Graphics protocol
protected:

显示的时候调用
virtual Adesk::Boolean subWorldDraw (AcGiWorldDraw *mode) ;
暂时不知道
virtual Adesk::UInt32 subSetAttributes (AcGiDrawableTraits *traits) ;


单击时候触发,显示夹点
virtual Acad::ErrorStatus subGetGripPoints(
    AcGePoint3dArray& gripPoints,
    AcDbIntArray&osnapModes,
    AcDbIntArray&geomIds) const;


移动时候触发
virtual Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
                                                   const AcGeVector3d& offset);


捕捉的时候
virtual Acad::ErrorStatus subGetOsnapPoints(
                                    AcDb::OsnapMode   osnapMode,
                                    Adesk::GsMarker   gsSelectionMark,
                                    const AcGePoint3d&pickPoint,
                                    const AcGePoint3d&lastPoint,
                                    const AcGeMatrix3d& viewXform,
                                    AcGePoint3dArray&   snapPoints,
                                    AcDbIntArray &   geomIds) const;


移动,旋转
virtual Acad::ErrorStatus   subTransformBy(const AcGeMatrix3d& xform);


暂时不知道
virtual Acad::ErrorStatus   subGetTransformedCopy(const AcGeMatrix3d& xform,
                                                   AcDbEntity*& pEnt) const;
} ;
//===========================================================================

MyLineEx::MyLineEx () : AcDbEntity () {
}


MyLineEx::MyLineEx(const AcGePoint3d& s,const AcGePoint3d& e)
{
m采用ptStart = s;
m采用ptStart = s;
m采用ptStart = s;


m采用ptEnd = e;
m采用ptEnd = e;
m采用ptEnd = e;
}


MyLineEx::~MyLineEx () {
}


单击实体的时候用到,添加夹点
Acad::ErrorStatus MyLineEx::subGetGripPoints(
    AcGePoint3dArray& gripPoints,
    AcDbIntArray&osnapModes,
AcDbIntArray&geomIds) const
{

//acedInitGet(RSG采用NOZERO + RSG采用NONULL+RSG采用NONEG,采用T(""));
assertReadEnabled();
// TODO: implement this function.
AcGeVector3d vecLine = m采用ptEnd - m采用ptStart;
acutPrintf(采用T("\nsubGetGripPoints"));
gripPoints.append(m采用ptStart);
gripPoints.append(m采用ptEnd);
gripPoints.append(m采用ptStart + vecLine / 2.0);
gripPoints.append(m采用ptStart + vecLine / 3.0);



return Acad::eOk;
}


拖动夹点的时候用到,indices为夹点数组的下标数组
Acad::ErrorStatus MyLineEx::subMoveGripPointsAt(const AcDbIntArray& indices,
const AcGeVector3d& offset)
{
assertWriteEnabled();
// TODO: implement this function.
assertReadEnabled();


int len = indices.length();
for(int i = 0;i < len; i++)
{
int k = indices;


switch(k)
{
case 0:
m采用ptStart += offset;
break;
case 1:
m采用ptEnd += offset;
break;
case 2:
case 3:
m采用ptStart += offset;
m采用ptEnd += offset;
break;
default:break;
}
}



return Acad::eOk;
}


捕捉的时候调用,添加捕捉点(交点不是这个函数)
Acad::ErrorStatus MyLineEx::subGetOsnapPoints(
                                    AcDb::OsnapMode   osnapMode,
                                    Adesk::GsMarker   gsSelectionMark,
                                    const AcGePoint3d&pickPoint,
                                    const AcGePoint3d&lastPoint,
                                    const AcGeMatrix3d& viewXform,
                                    AcGePoint3dArray&   snapPoints,
                                    AcDbIntArray &   geomIds) const
{
//assertWriteEnabled();
// TODO: implement this function.
assertReadEnabled();
// TODO: implement this function.
snapPoints.append(m采用ptStart);
snapPoints.append(m采用ptEnd);
snapPoints.append(m采用ptStart + (m采用ptEnd - m采用ptStart) / 2);
snapPoints.append(m采用ptStart + (m采用ptEnd - m采用ptStart) / 3);
//snapPoints.append(m采用ptStart + (m采用ptEnd - m采用ptStart) / 4);


/*return Acad::eOk;*/
return Acad::eOk;/*AcDbEntity::getOsnapPoints(osnapMode, gsSelectionMark, pickPoint, lastPoint, viewXform, snapPoints, geomIds);*/
}


实现移动,旋转等变换
Acad::ErrorStatus   MyLineEx::subTransformBy(const AcGeMatrix3d& xform)
{
assertReadEnabled();
assertWriteEnabled();


m采用ptStart.transformBy(xform);
m采用ptEnd.transformBy(xform);
//m采用center.transformBy(mat);
return Acad::eOk;
}


Acad::ErrorStatus MyLineEx::subGetTransformedCopy(const AcGeMatrix3d& xform,AcDbEntity*& pEnt) const
{
assertReadEnabled();


//AcGePoint3d ptS = m采用ptStart;
//AcGePoint3d ptE = m采用ptEnd;
//
//ptS.transformBy(xform);
//ptE.transformBy(xform);


//AcDbLine* ent = new AcDbLine(m采用ptStart,m采用ptEnd);
//assert(ent != NULL);
//ent->setPropertiesFrom(this);
//pEnt = ent;


acutPrintf(采用T("\naaa"));
//m采用ptStart.transformBy(xform);
//m采用ptEnd.transformBy(xform);
return Acad::eOk;
}




//-----------------------------------------------------------------------------
//----- AcDbObject protocols
//- Dwg Filing protocol
Acad::ErrorStatus MyLineEx::dwgOutFields (AcDbDwgFiler *pFiler) const {
assertReadEnabled () ;
//----- Save parent class information first.
Acad::ErrorStatus es =AcDbEntity::dwgOutFields (pFiler) ;
if ( es != Acad::eOk )
return (es) ;
//----- Object version number needs to be saved first
if ( (es =pFiler->writeUInt32 (MyLineEx::kCurrentVersionNumber)) != Acad::eOk )
return (es) ;
//----- Output params
//.....
这两句加上才能复制
pFiler->writePoint3d(m采用ptStart);
pFiler->writePoint3d(m采用ptEnd);


return (pFiler->filerStatus ()) ;
}


Acad::ErrorStatus MyLineEx::dwgInFields (AcDbDwgFiler *pFiler) {
assertWriteEnabled () ;
//----- Read parent class information first.
Acad::ErrorStatus es =AcDbEntity::dwgInFields (pFiler) ;
if ( es != Acad::eOk )
return (es) ;
//----- Object version number needs to be read first
Adesk::UInt32 version =0 ;
if ( (es =pFiler->readUInt32 (&version)) != Acad::eOk )
return (es) ;
if ( version > MyLineEx::kCurrentVersionNumber )
return (Acad::eMakeMeProxy) ;
//- Uncomment the 2 following lines if your current object implementation cannot
//- support previous version of that object.
//if ( version < MyLineEx::kCurrentVersionNumber )
// return (Acad::eMakeMeProxy) ;
//----- Read params
//.....
这两句加上,才能复制
pFiler->readPoint3d(&m采用ptStart);
pFiler->readPoint3d(&m采用ptEnd);






return (pFiler->filerStatus ()) ;
}

//-----------------------------------------------------------------------------
//----- AcDbEntity protocols
Adesk::Boolean MyLineEx::subWorldDraw (AcGiWorldDraw *mode) {
assertReadEnabled () ;


//获取虚线线型ID
mode->subEntityTraits().setColor(150);


AcGePoint3d Verts;
Verts=m采用ptStart;
Verts=m采用ptEnd;
mode->geometry().polyline(2,Verts);


return (AcDbEntity::subWorldDraw (mode)) ;
}
页: [1]
查看完整版本: arx 自定义实体简单实例